Kia Sedona 2008 Service Repair Manual
These repair manuals covers the operation and repair of a Kia Sedona vehicle. The book describes the repair of cars with gasoline and diesel engines of 2.7, 3.5, 3.8, 2.2D and 2.9D liters.
The premiere of the first full-size mini-van Kia Sedona was held at the Geneva Motor Show in 1998. The car, built on the Ford Windstar platform, was in many ways close to the American models of this class: large headlights, double sliding side doors, a massive bumper, a spacious lounge with a high ceiling, a flat floor and a wide aisle between the seats, which you can move for convenience of passengers or push apart for the transport of bulky cargo.
In some countries, the model was sold under the name Sedona. The car enjoyed deserved popularity, and its appearance was updated several times, as a result of which the shape of the radiator grille, headlights and bumpers changed.
In 2006, the premiere of the second generation model Kia Sedona (factory index – VQ). The new full-size MPV (Multi Purpose Vehicle, or “multi-purpose vehicle”, as Europe means mini-vans), built on the Kia Magentis platform, was developed specifically for the European market and is offered in two wheelbase options: short (SWB) and long (LWB ).
The latest version is sometimes found under the name Grand Carnival in American style. A little later, for the North American market, the Hyundai Kia Automotive Group created the Hyundai Entourage, which is structurally identical to the long-wheelbase Kia Sedona models.
CONTENTS
- abs
- ac compressor control
- ac service
- air bag driver
- airbag control
- airbag controle module
- airbag general
- airbag passenger
- airbag troubleshooting
- audio
- auto lighting control
- automatic transmission
- axle front
- axle rear
- BCM
- blower and ac controls
- body general
- brake system general
- brake system
- bumpers
- charging
- crash pad
- cruise control
- defogger
- deicer
- door locks
- driveshaft general
- driveshaft
- ebd
- electrical component locations
- emission crankcase
- emission evap
- emission orvr
- engine electrical general
- ENGINE
- esp
- exterior
- front suspension
- fuel delivery system
- fuel system general
- fuses
- gages
- heater front
- heater rear
- horns
- hvac general
- ignition
- interior
- keyless entry
- kia trouble codes
- lighting
- multi function switch
- parking brake
- power mirrors
- power sliding door
- power steering
- power tailgate
- power windows
- rear suspension
- seats
- starter
- steering column
- steering system
- sunroof
- suspension system
- TROUBLE CODES
- wiper washer rear
- wiper washer
- wiring
Language: English
Format: PDF
Kia Sedona manuals
The Kia Sedona may not be the first name you think of when shopping for a new or used minivan. The original Sedona had almost everything needed to be a success in the minivan segment, but it was pudgy, weighing some 400-700 pounds more than its rivals, which blunted acceleration at higher speeds and didn’t do much for cornering ability. Still, overall performance was relatively refined, if not exciting.
Set against the backdrop of one of the world’s premier urban playgrounds, Kia Motors America (KMA) took the wraps off the all-new 2015 Sedona midsize multi-purpose vehicle in New York City. As the final chapter in Kia’s design-led transformation story — which began in 2009 and has seen a comprehensive makeover of Kia’s entire model line under the direction of chief design officer Peter Schreyer — the all-new Sedona’s CUV-like styling and proportions offer all of the functional convenience of the segment while defying its design limitations.
Manuals for all generetions of Kia Sedona car
Owners Manual for the fourth generation DS 3, a supermini car, produced by the French manufacturer Citroën, model years 2018-2021. This Owners Manual contains the key information and recommendations you will need to be able to explore your vehicle in complete safety. We strongly recommend familiarising yourself with it, as well as the Maintenance and Warranty Guide.
The Sedona is premium comfort with the power to transform. Aggressive and refined, it’s your getaway vehicle and lounge on the go. The Sedona is comfort for everyone, fitted with high-tech gadgets, like the Smart Power Liftgate, and available second-row First-Class Lounge Seating.
Kia introduced the second generation Carnival/Sedona worldwide for model year 2006–in short (SWB) and long-wheelbase (LWB) models – with a 2-inch-wider front track, 3-inch-wider rear track and reduced turning radius than the first generation.
The first generation model was manufactured and marketed differently for specific regions, including under a joint venture in the Chinese market with Dongfeng Yueda Kia Automobile Company, as well as the Naza Ria in Malaysia.
KIA SEDONA 2019 Service Manual
325
Safety features of your vehicle
If the rear catches of the seat are
locked into the rear anchors (2) while
the front catches are not locked into
the front anchors (1), do the follow-
ings to release the rear catches from
the rear anchors.Pull the removal strap and lift the
rear portion of the seat cushion.
Then the rear catches will be released.
Remove the seat while lifting up the
rear portion of seat cushion and then
reinstalling the tumble seat.
WARNING — Installing or
removing the tumble seat
Do not install or remove the
tumble (2nd row center) seat, if
there are occupants in the 3rd
row seats, as this may injure
occupants.
OYP034233N
OYP034235NOYP034223N
Page 42 of 593
Safety features of your vehicle
26
3
Stowing the rear seat
— 3rd row seat
The rear seat can be folded and
stowed in the luggage compartment
to provide additional cargo space. To stow the rear seat:
1. Lower the headrest to the lowest
position. To stow easily, adjust the
seatback to upright position. (if
necessary)
2. Pull up the seat by using the stow-ing lever.
3. Stow the seat by pushing down firmly.
OYP034240N
OYP037241
OYP034242N
Page 43 of 593
327
Safety features of your vehicle
Make sure there is no body or object
around the seat and be careful not to
injure your hands or body under the
seat or in the moving parts when
stowing or reinstalling the seat.To use the rear seat:
1. Lift the seat by pulling up the stow-ing lever.CAUTION- To stow 3rd
row seat
Do not stow the 3rd row seatwhen the seat back is foldeddown. It may damage the 3rdseat mechanism.
OYP037304
OYP037286
Page 44 of 593
Safety features of your vehicle
28
3
2. Release the lever and push the
seat forward firmly until it clicks
into place to insert the catches
into the anchors.
✽ ✽NOTICE
Do not push down the upper part of
the seatback when pushing the seat
forward. Doing so can prevent the
catches from being locked in posi-
tion.
3. Make sure the catches are locked
in position by moving the seat for-
ward and backward or lifting the
front portion of the seat. If the seat
moves, it is not locked properly. 4.Pull out and hold the folding strap.
5.Hold the seat back when you
adjust the seat back angle until it
clicks into place and then release
the folding strap.
Make sure the seatback is locked
in place.
6.Return the rear seat belt to the proper position.
OYP037243NOYP034287NOYP037305
Page 45 of 593
329
Safety features of your vehicle
When you fold the rear (2nd and/or
3rd row) seatback, insert the buckle
in the pocket between the rear seat-
back and cushion. Doing so can pre-
vent the buckle from being damaged
by the rear seatback.
When returning the rear (2nd and/or
3rd row) seatbacks to the upright
position, remember to return the rear
shoulder belts to their proper posi-
tion. Routing the seat belt webbing
through the rear seat belt guides will
help keep the belts from being
trapped behind or under the seats.
Make sure the engine is off, the
automatic transaxle is in P (Park)
and the parking brake is securely
applied whenever loading or unload-
ing cargo. Failure to take these steps
may allow the vehicle to move if the
shift lever is inadvertently moved to
another position.
WARNING- Cargo
Do not place heavy objects in
the rear seats, since they can-
not be properly secured and
may hit vehicle occupants in a
frontal collision.
OUN026140
WARNING — 3rd row seat
3rd row occupants should always
remain in the center of the seat
cushion so the occupants head
is protected by the headrest.
If not, the liftgate may hit the
occupant’s head, which could
cause injury.
Page 46 of 593
Safety features of your vehicle
30
3
Armrest (2nd row seat)
The 2nd row seats have the armrest
located on the side of seatback. Type A
To use the armrest, swing down the
armrest to the lowest position.
Type B
To use the armrest, press the release
button (1) on the armrest and adjust
the angle to the desired position. And
then release the button (1).
Seatback pocket (for SXL package)
The seatback pocket is provided on
the back of the 2nd row outboard
seatbacks.
OYP034254N
OYP034300N/Q
■
Type A
■ Type B (for SXL package)
OYP034255N
Page 47 of 593
331
Safety features of your vehicle
Headrest (for rear seat)
The rear seat(s) is equipped with
headrests in all the seating positions
for the occupant’s safety and comfort.
The headrest not only provides com-
fort for passengers, but also helps
protect the head and neck in the
event of a collision.For maximum effectiveness in case
of an accident, the headrest should
be adjusted so the middle of the
headrest is at the same height as the
center of gravity of an occupant’s
head.
Generally, the center of gravity of
most people’s head is similar with
the height of the top of their eyes.
Also adjust the headrest as close to
your head as possible. For this rea-
son, the use of a cushion that holds
the body away from the seatback is
not recommended.
WARNING- Seatback
pockets
Do not put heavy or sharp
objects in the seatback pockets.
In an accident they could come
loose from the pocket and
injure vehicle occupants.
OYP034288N
* : if equipped
ODM032054
*
Page 48 of 593
Safety features of your vehicle
32
3
Adjusting the height up and down
OYP034248NOYP034301N
OYP034302N
■ 2nd row outboard
OYP034298N
OYP034303N
■2nd row for SXL package
■3rd row■2nd row center (if equipped)To raise the headrest :
1. Pull it up to the desired position
(1).
To lower the headrest :
1. Push and hold the release button (2) on the headrest support
2. Lower the headrest to the desired position (3).
Page 49 of 593
333
Safety features of your vehicle
Removal and reinstallation
To remove the headrest :
1. Raise it as far as it can go thenpress the release button (1) while
pulling the headrest up (2).
To reinstall the headrest :
1. Put the headrest poles (3) into the holes while pressing the release
button (1).
2. Adjust it to the appropriate height. After installing the headrest, make
sure that it is installed in the right
direction.
A headrest installed reversely could
increase whiplash injury during rear
impact.
2nd row outboard headrest
The headrest will fold down automat-
ically when the seat is in the walk in
potion.
Always be sure the headrest has
locked into position after you return
the seatback.
OYP034250NOYP034252N
CAUTION — Auto-folding
headrest
Do not remove the headrest in
vehicles equipped with the sec-ond row auto-folding function.The cable may become dislocat-ed or damaged when the head-rest is removed, and may lead toauto-folding function failure.
Page 50 of 593
Safety features of your vehicle
34
3
Forward and backward adjustment
(2nd row seat for SXL package)
The headrest may be adjusted for-
ward or backward by pulling the
lower part of the headrest forward or
backward to the desired detent in the
direction of the arrow. Adjust the
headrest so that it properly supports
the head and neck.
Wing-out(2nd row seat for SXL package)
For rear outboard passenger’s com-
fort, the ends of the headrest can be
adjusted inward.
OYP034295NOYP034296N