Главная » KIA

Cpu variant coding kia

Содержание
  1. Kia Optima: Variant coding
  2. Categories
  3. 2023 Hyundai Kia Engineering Mode, Dealer Mode, Engineer Mode, hidden Android menu and secret features of radio and navigation
  4. Тема: Требуется CLU код

Kia Optima: Variant coding

In this case, perform the variant coding procedure again after confirming the cause in �DTC Fault State Information�.

DTC B1762 (ACU Coding Error) and B1102 (Battery Voltage Low) may be displayed simultaneously.

2) VIN Code entering screen

3) Variant coding’s proceeding screen-1

4) Variant coding’s proceeding screen-2

5) Variant coding is completed

1) This screen is opened when you try the variant coding again on the SRSCM that already has the variant coding performed.

2) If communication fails, the following screen will appear.

1) Initial ACU Variant Coding screen

2) ACU Coding Code entering screen

3) Screen of rechecking ACU Coding code’s entering

4) Variant coding’s proceeding screen-1

5) Variant coding’s proceeding screen-2

6) Variant coding is completed

1) This screen is opened when you try the variant coding again on the SRSCM that already has the variant coding performed.

Installation

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. In .

Front Impact Sensor (FIS). Description and Operation

Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary pur .

See also:

Rear Glass Defogger Printed Heater. Repair procedures
Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the .

Moving the front seat forward and backward
Push the control knob forward or backward to move the seat to the desired position. Release the knob and the seat will lock in that position. 1. Reclining Control Knob 2. Sliding and Height Adju .

Categories

Источник

2023 Hyundai Kia Engineering Mode, Dealer Mode, Engineer Mode, hidden Android menu and secret features of radio and navigation

Články

How to show the secret menu Engineering Mode and Dealer Mode of Hyundai & Kia & Genesis infotainment system. Sonata, Azera, Grandeur, Veloster, i30, Elantra, Accent, i20, i10, Kona, Ioniq 6, Ioniq 5, Nexo, Santa Fe, Tucson, Palisade, Creta, Venue, Staria, H-1, H-100, Stargazer, i40, ix35, ix20. Soul, e-Soul, Seltos, Sportage, Sorento, Carnival, Telluride, Niro, EV6, EV9, Rio, Forte, K5, Stinger, Picanto, Morning, Ray, K3, K8, K9, Mohave, Bongo 3, Ceed, XCeed, ProCeed, Stonic, Sonet, Carens, Optima – DAB/FM AM radio

Hyundai Kia DAB Engineering Mode

Hyundai Kia DAB Engineering Mode

PROCEDURE MAY VARY FROM CAR TO CAR, NOT WORKING ON ALL SYSTEMS. DO NOT CHANGE ANY HIDDEN SETTING, DO NOT USE IT WHILE DRIVING. USE IT CAREFULLY AT YOUR OWN RISK AND COST!

Engineering Mode (CTS Test, ADB Connect Type, Android Setting, All Applications)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose Screensaver
  3. Tap below Digital – Analogue – None options from left to right and back 7 times in total (tap below Digital, Analogue, None, Analogue, Digital, Analogue, None)
  4. Password is the current time or 2400
  5. Choose Send

Engineering Mode (System, Navigation, Reception, …)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info
  3. Tap 4 times on „Firmware“ or „Map“ and tap once on its version on the same line
  4. Password is 1111 or 2998
  5. Choose Send
  6. Choose Reception -> RDS -> RDS State (TestMode); choose DAB -> DAB State (DAB Engineering Mode)
  • OR
  1. Press the Setup button or choose All menus -> Settings
  2. Choose Screensaver
  3. Tap below Digital – Analogue – None options from left to right and back 7 times in total (tap below Digital, Analogue, None, Analogue, Digital, Analogue, None)
  4. Password is the current time or 2400
  5. Choose Send
  6. Choose All Applications
  7. Choose 3rd Engineering Mode from the top (not the first Engineering Mode, not the DAB Engineering Mode)
  • OR
  1. Press the Setup button or Choose All menus -> Settings
  2. Choose System Info
  3. Press the left knob (volume) to turn off the AV
  4. In the dark part of the screen tap 4 times in the right bottom and once in the left bottom
  • OR
  1. Press the Setup button or choose All menus -> Settings
  2. Choose System info to see last 6 digits of the Software version (e.g. 221117)
  3. Choose Update
  4. Imagine the dark part of the screen is a phone dial with buttons 1 to 9 and the button 0 is in the left bottom of the whole screen
  5. On the imaginary dial enter last 6 digits of the Software version (e.g. 221117)
  6. Password is the current time + last 4 digits of the Software version (e.g. current time is 15:48 -> enter 15481177)
  7. Choose Send

Engineering Mode (All in One Version, …)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info OR General
  3. Tap 5 times left from the Update button and tap once right from the Update button or choose Storage and in the dark part of the screen tap 5 times in the left bottom and once in the right bottom
  4. Password is 2900 or 2400 or 2702 or 2801 or 2603 or 2504 or 2405 or 2306 or 2207 or 2108 or 2009 or 2014
  5. Choose OK
  6. Choose Module Info
  7. Choose FM -> Launch FM Engineering Mode; choose AM -> Launch AM Engineering Mode; choose DAB -> Launch DAB Engineering Mode
  • OR
  1. Choose Radio -> FM
  2. Set the volume to 2
  3. Press the Setup button or choose All menus -> Settings
  4. Choose General
  5. Tap 5 times left from the Update button and tap once right from the Update button
  6. Password is 2900 or 2400 or 2702 or 2801 or 2603 or 2504 or 2405 or 2306 or 2207 or 2108 or 2009 or 2014
  7. Choose OK
  8. Choose OK
  9. Choose Module Info
  10. Choose FM -> Launch FM Engineering Mode; choose AM -> Launch AM Engineering Mode; choose DAB -> Launch DAB Engineering Mode

Engineer Mode (Full Engineering Mode) – 2 knobs

  1. Choose Radio
  2. In a quick sequence set the volume using left knob to level 0, then to level 7 and press the right knob, then set the volume to level 3 and press the right knob, then set the volume to level 1 and press the right knob
  3. Password is 0428 or 0652 or 500625 or 19500624 or 27021427 or 26031236
  4. Choose Dynamics -> Radio

Engineer Mode (Full Engineering Mode) – 1 knob

  1. Set the volume to 0
  2. Press and hold the Star button
  3. Choose VOL knob -> Browse media, map zoom in/out
  4. Choose Home
  5. On the steering wheel set the volume to level 7 and press the Volume knob, then set the volume to level 3 and press the Volume knob, then set the volume to level 1 and press the Volume knob
  6. Password is 0652

EngineerMode (System, Diagnostics, Location, Radio, Voice Recognition)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose General -> System info -> Memory
  3. In the dark part of the screen perform 6 taps in a quick sequence: Tap once below „Available…“ and the orange/grey line, tap 2 times below „Used for…“ and the orange/grey line, tap once above the orange/grey line between „Used for…“ and „Available…“, tap once below the middle of the orange/grey line and tap once below „Available…“ and the orange/grey line
  4. Password is 1032580 + minutes of current time (e.g. current time is 15:48 -> input 103258048)
  5. Choose OK

Dealer Mode (Diagnostics, Location, Media, Radio, Smart Pure Air Version Info/Update)

  1. Press the Setup button or choose All menus -> Settings
  2. Choose System Info
  3. In a quick sequence set the volume using left knob to level 0, then to level 7 and press the right knob, then set the volume to level 3 and press the right knob, then set the volume to level 1 and press the right knob
  4. Password is 2400
  5. Choose Send
  • OR
  1. Press the Setup button or choose All menus -> Settings
  2. Choose General -> System info -> Version info/Update
  3. In a quick sequence set the volume to level 7 and tap on the word „Update“ in the title Version info/Update, then set the volume to level 3 and tap on the word „Update“ in the title Version info/Update, then set the volume to level 1 and tap on the word „Update“ in the title Version info/Update
  4. Password is 2400
  5. Choose OK

DAB 1 – Overview (Freq, …)

Testmode on older systems – GEN 1.x, GEN 2.0

  1. Go to the Radio mode
  2. Press and hold the Setup button until a screen with device information appears
  3. Touch and hold the screen in the middle until „Testmode“ screen appears
  4. Choose OK
  5. Password is 123456
  6. Choose OK

Hidden service menu on older systems – A-200FDE etc.

  1. Acc on, radio off
  2. Press and hold preset keys „1“ and „4“ together for 6 seconds
  3. Press the preset key „1“ 4 times (1111)
  4. Press the preset key „4“ to display settings for RDS

WATCH RELATED VIDEOS:

PROCEDURE MAY VARY FROM CAR TO CAR, NOT WORKING ON ALL SYSTEMS. DO NOT CHANGE ANY HIDDEN SETTING, DO NOT USE IT WHILE DRIVING. USE IT CAREFULLY AT YOUR OWN RISK AND COST!

Источник

Тема: Требуется CLU код

В общем мучениями удалось активировать TPMS и систему удержания полосы. Отключились адаптивные фары.
Сейчас вернул все в зад, но сам факт того что это включается радует. Камера на лобовое стоит 1500$

Если у кого есть возможность помочь с кодингом, CLU кодом или может найти вин от машины по комплектации, откликнитесь!

Aquila

  • Просмотр профиля
  • Сообщения форума
  • Личное сообщение
  • View Gallery Uploads

Aquila вне форума

V.I.P.Optimaclub ( 80952 )

1,622 622

ЦитатаСообщение от Aquila Посмотреть сообщение

можно активировать. Проблема только в одном. Активация смарт круиз требует наличия контроля полосы. Проводка в крыше для камеры есть. Камера стоит 1560$. Помимо камеры требуется блок экстренного торможения(провода «барсук» тоже лежат) блок стоит 800 дохлых енотов. Ну и нужен смарт круиз- 1320$ и новая решетка на морду. Я посчитал, просто запчастей на 3500 зелени.
Подожду пока набьют в америке этих машин, и можно поставить.
Еще нужен новый блок переключателей, где кнопка удержания полосы.

Источник

Читайте также:  Как открыть замок двери киа спектра
Оцените статью
© 2024 KIA Rio автомобиль